Moore and More >

2025 , Vol. 1 >Issue 1: 16 - 25

DOI: https://doi.org/10.1007/s44275-024-00008-x

ORIGINAL ARTICLES

Impact of the alkyl side-chain length on solubility, interchain packing, and charge-transport properties of amorphous π-conjugated polymers

  • Qingqing Dai ,
  • Xingyou Lang ,
  • Jean-Luc Brédas ,
  • Tonghui Wang ,
  • Qing Jiang
Expand
  • 1. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun, 130022, China;
    2. Key Laboratory of Automobile Materials, Ministry of Education, and School of Materials Science and Engineering, Jilin University, Changchun, 130022, China;
    3. Department of Chemistry and Biochemistry, The University of Arizona, Tucson, AZ, 85721-0041, USA

Received date: 2024-04-19

  Revised date: 2024-06-19

  Accepted date: 2024-06-20

  Online published: 2024-08-20

Supported by

National Key R&D Program of China (No. 2023YFB3003001).

Fold

Abstract

Increasing the length of alkyl side chains is a typical way to improve the solubility of π-conjugated polymers designed for use in solution-processed devices. However, these modifications have also been reported to alter the film morphology. Given that the mechanism leading to improved solubility is not well documented yet and the nanoscale (local) morphologies of amorphous π-conjugated polymer films are difficult to characterize experimentally, here, we combine molecular dynamics simulations and long-range corrected density functional theory calculations to examine at the molecular scale the impact that the alkyl side-chain length has on polymer solubility and film morphologies. As a representative example, we consider poly(thieno[3,4-c]pyrrole-4,6-dione-alt-3,4-difluorothiophene) (PTPD[2F]T) with two different lengths of the alkyl side chains on the thieno[3,4-c]pyrrole-4,6-dione (TPD) moieties, i.e., 2-hexyldecyl (2HD) and 2-decyltetradecyl (2DT). A detailed analysis of polymer-solvent and polymer-polymer interactions provides a picture that describes the underlying mechanism for improved solubility in going from 2HD to 2DT. We then underline an intrinsic characteristic that decreasing the side-chain length brings a greater extent of backbone planarity and lesser side chain-TPD interactions, which leads to higher interchain π-π packing density and order, while the interchain π-π packing patterns remain similar in the two films. These morphologies are discussed in terms of the charge-transport properties between neighboring PTPD[2F]T chains, which point to a higher electron mobility in the PTPD[2F]T films with shorter alkyl side chains. Overall, our findings offer guidance in the field of solution-processed electronic devices by pointing out that the polymer alkyl side-chain length could be minimized to improve carrier mobility while ensuring polymer solubility.

Key words： π-conjugated polymers; Alkyl side-chain length; Solubility; Local morphology; Molecular dynamics simulations; Density functional theory calculations

Cite this article

Qingqing Dai , Xingyou Lang , Jean-Luc Brédas , Tonghui Wang , Qing Jiang . Impact of the alkyl side-chain length on solubility, interchain packing, and charge-transport properties of amorphous π-conjugated polymers[J]. Moore and More, 2025 , 1(1) : 16 -25 . DOI: 10.1007/s44275-024-00008-x

References

[1] Oh JY, Rondeau-Gagné S, Chiu YC, Chortos A, Lisse F, Wang GJN, et al. (2016) Intrinsically stretchable and healable semiconducting polymer for organic transistors. Nature 539:411-416. https://doi.org/10.1038/nature20102
[2] Ding L, Yu ZD, Wang XY, Yao ZF, Lu Y, Yang CY, et al. (2023) Polymer semiconductors: Synthesis, processing, and applications. Chem Rev 123:7421-7497. https://doi.org/10.1021/acs.chemrev.2c00696
[3] Lin YL, Wang J, Zhang ZG, Bai H, Li Y, Zhu D, et al. (2015) An electron acceptor challenging fullerenes for efficient polymer solar cells. Adv Mater 27:1170-1174. https://doi.org/10.1002/adma.201404317
[4] Zhao J, Li Y, Yang G, Jiang K, Lin H, Ade H, et al. Efficient organic solar cells processed from hydrocarbon solvents. Nat. Energy 1:15027. https://doi.org/10.1038/nenergy.2015.27
[5] Yuan J, Zhang Y, Zhou L, Zhang G, Yip HL, Lau TK, et al. (2019) Joule 3:1140-1151. https://doi.org/10.1016/j.joule.2019.01.004
[6] Guan S, Li Y, Xu C, Yin N, Xu C, Wang C, et al. (2024) Self-assembled interlayer enables high-performance organic photovoltaics with power conversion efficiency exceeding 20%. Adv Mater. https://doi.org/10.1002/adma.202400342
[7] Van derZee B, Li Y, Wetzelaer GJAH, Blom PWM (2022) Efficiency of polymer light-emitting diodes: a perspective. Adv Mater 34:2108887. https://doi.org/10.1002/adma.202108887
[8] Flory PJ (1953) Principles of polymer chemistry. Cornell University Press, Ithaca, NY
[9] Jackson NE, Chen LX, Ratner MA (2014) Solubility of nonelectrolytes: A first-principles computational approach. J Phys Chem B 118:5194-5202. https://doi.org/10.1021/jp5024197
[10] Wang T, Brédas JL (2020) Organic solar cells based on non-fullerene small-molecule acceptors: impact of substituent position. Matter 2:119-135. https://doi.org/10.1016/j.matt.2019.10.025
[11] Wang T, Brédas JL (2021) Organic photovoltaics: understanding the preaggregation of polymer donors in solution and its morphological impact. J Am Chem Soc 143:1822-1835. https://doi.org/10.1021/jacs.0c09542
[12] Gadisa A, Oosterbaan WD, Vandewal K, Bolsée JC, Bertho S, D’Haen J, et al. (2009) Effect of alkyl side-chain length on photovoltaic properties of poly(3-alkylthiophene)/PCBM bulk heterojunctions. Adv Funct Mater 19:3300-3306. https://doi.org/10.1002/adfm.200900797
[13] Szarko JM, Guo J, Liang Y, Lee B, Rolczynski BS, Strzalka J, et al. (2010) When function follows form: Effects of donor copolymer side chains on film morphology and BHJ solar cell performance. Adv Mater 22:5468-5472. https://doi.org/10.1002/adma.201002687
[14] Yiu AT, Beaujuge PM, Lee OP, Woo CH, Toney MF, Fréchet JMJ (2012) Side-chain tunability of furan-containing low-band-gap polymers provides control of structural order in efficient solar cells. J Am Chem Soc 134:2180-2185. https://doi.org/10.1021/ja2089662
[15] Cabanetos C, Labban AE, Bartelt JA, Douglas JD, Mateker WR, Fréchet JMJ, et al. (2013) Linear side chains in benzo[1, 2-b:4, 5-b’]dithiophene-thieno[3, 4-c]pyrrole-4, 6-dione polymers direct self-assembly and solar cell performance. J Am Chem Soc 135:4656-4659. https://doi.org/10.1021/ja400365b
[16] Yang L, Tumbleston JR, Zhou H, Ade H, You W (2013) Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends. Energy Environ Sci 6:316-326. https://doi.org/10.1039/C2EE23235A
[17] Lee C, Kang H, Lee W, Kim T, Kim KH, Woo HY, et al. (2015) High-performance all-polymer solar cells via side-chain engineering of the polymer acceptor: The importance of the polymer packing structure and the nanoscale blend morphology. Adv Mater 27:2466-2471. https://doi.org/10.1002/adma.201405226
[18] Jung JW, Jo JW, Chueh CC, Liu F, Jo WH, Russell TP, et al. (2015) Fluoro-substituted n-type conjugated polymers for additive-free all-polymer bulk heterojunction solar cells with high power conversion efficiency of 6.71%. Adv Mater 27:3310-3317. https://doi.org/10.1002/adma.201501214
[19] Duan C, Willems REM, van Franeker JJ, Bruijnaers BJ, Wienk MM, Janssen RAJ (2016) Effect of side chain length on the charge transport, morphology, and photovoltaic performance of conjugated polymers in bulk heterojunction solar cells. J Mater Chem A 4:1855-1866. https://doi.org/10.1039/C5TA09483F
[20] Liu S, Kan Z, Thomas S, Cruciani F, Brédas JL, Beaujuge PM (2016) Thieno[3, 4-c]pyrrole-4, 6-dione-3, 4-difluorothiophene polymer acceptors for efficient all-polymer bulk heterojunction solar cells. Angew Chem Int Ed 55:12996-13000. https://doi.org/10.1002/anie.201604307
[21] Lee W, Lee C, Yu H, Kim DJ, Wang C, Woo HY, et al. (2016) Side chain optimization of naphthalenediimide-bithiophene-based polymers to enhance the electron mobility and the performance in all-polymer solar cells. Adv Funct Mater 26:1543-1553. https://doi.org/10.1002/adfm.201504191
[22] Guo Y, Li Y, Awartani O, Han H, Zhang G, Ade H, et al. (2017) Side-chain engineering of perylenediimide-vinylene polymer acceptors for high-performance all-polymer solar cells. Mater Chem Front 1:1362-1368. https://doi.org/10.1039/C6QM00355A
[23] Cho HH, Kim T, Kim K, Lee C, Kim FS, Kim BJ (2017) Synthesis and side-chain engineering of phenylnaphthalenediimide (PNDI)-based n-type polymers for efficient all-polymer solar cells. J Mater Chem A 5:5449-5459. https://doi.org/10.1002/adfm.202308435
[24] Zhan P, Zhang W, Jacobs IE, Nisson DM, Xie R, Weissen AR, et al. (2018) Side chain length affects backbone dynamics in poly(3-alkylthiophene)s. J Polym Sci Part B: Polym Phys 56:1193-1202. https://doi.org/10.1002/polb.24637
[25] Wang T, Coropceanu V, Brédas JL (2019) All-polymer solar cells: Impact of the length of the branched alkyl side chains on the polymer acceptors on the interchain packing and electronic properties in amorphous blends. Chem Mater 31:6239-6248. https://doi.org/10.1021/acs.chemmater.9b02284
[26] Park JS, Kim GU, Lee S, Lee JW, Li S, Lee JY, et al. (2022) Material design and device fabrication strategies for stretchable organic solar cells. Adv Mater 34:2201623. https://doi.org/10.1002/adma.202201623
[27] Ding Y, Zhu Y, Wang X, Wang Y, Zhang S, Zhang G, et al. (2022) Side chain engineering: Achieving stretch-induced molecular orientation and enhanced mobility in polymer semiconductors. Chem Mater 34:2696-2707. https://doi.org/10.1021/acs.chemmater.1c04085
[28] Wang B, Xu T, Zou J, Luan S (2023) Optimization of alkyl side chain length in polyimide for gate dielectrics to achieve high mobility and outstanding operational stability in organic transistors. ACS Appl Mater Interfaces 15:7204-7216. https://doi.org/10.1021/acsami.2c18495
[29] Do K, Saleem Q, Ravva MK, Cruciani F, Kan Z, Wolf J, et al. (2016) Impact of fluorine substituents on π-conjugated polymer main-chain conformations, packing, and electronic couplings. Adv Mater 28:8197-8205. https://doi.org/10.1002/adma.201601282
[30] Marcus RA (1993) Electron transfer reactions in chemistry. Theory and experiment. Rev Mod Phys 65:599-610. https://doi.org/10.1103/RevModPhys.65.599
[31] Chen H, Zhang R, Chen X, Zeng G, Kobera L, Abbrent S, et al. (2021) A guest-assisted molecular-organization approach for >17% efficiency organic solar cells using environmentally friendly solvents. Nat Energy 6:1045-1053. https://doi.org/10.1038/s41560-021-00923-5
[32] Plimpton S (1995) Fast parallel algorithms for short-range molecular dynamics. J Comput Phys 117:1-19. https://doi.org/10.1006/jcph.1995.1039
[33] Jorgensen WL, Tirado-Rives J (1988) The OPLS [optimized potentials for liquid simulations] potential functions for proteins, energy minimizations for crystals of cyclic peptides and crambin. J Am Chem Soc 110:1657-1666. https://doi.org/10.1021/ja00214a001
[34] Dahlgren MK, Schyman P, Tirado-Rives J, Jorgensen WL (2013) Characterization of biaryl torsional energetics and its treatment in OPLS all-atom force fields. J Chem Inf Model 53:1191-1199. https://doi.org/10.1021/ci4001597
[35] Jackson NE, Kohlstedt KL, Savoie BM, de la Cruz MO, Schatz GC, Chen LX, et al. (2015) Conformational order in aggregates of conjugated polymers. J Am Chem Soc 137:6254-6262. https://doi.org/10.1021/jacs.5b00493
[36] Boys SF, Bernardi F (2009) The calculation of small molecular interactions by the differences of separate total energies. Some procedures with reduced errors. Mol Phys 19:553-566. https://doi.org/10.1080/00268970110088901
[37] Frisch MJ, Trucks GW, Schlegel HB, Scuseria GE, Robb MA, Cheeseman JR, et al (2013) Gaussian 09, Revision D.01. Gaussian, Inc., Wallingford CT
Options
Outlines

/

〈 〉

Copyright © Moore and More, All Rights Reserved.