Moore and More >

2025 , Vol. 1 >Issue 2: 134 - 146

DOI: https://doi.org/10.1007/s44275-024-00014-z

ORIGINAL ARTICLES

Self-assembled organic monolayer functionalized MIL-88B for selective acetone detection at room temperature

  • Yuqing Du ,
  • Ning Lian ,
  • Wei Liu ,
  • Zhiheng Zhang ,
  • Jiahang Huo ,
  • Xin Chen ,
  • Junmeng Guo ,
  • Peng Cui ,
  • Lei Wei ,
  • Zuliang Du ,
  • Gang Cheng
Expand
  • 1. School of Nanoscience and Materials Engineering, Key Lab for Special Functional Materials, Ministry of Education, Henan University, Kaifeng, 475004, Henan, China;
    2. College of Information Engineering, Technology & Media University of Henan Kaifeng, Kaifeng, 475004, Henan, China;
    3. School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore, 639798, Singapore

Received date: 2024-07-30

  Revised date: 2024-10-06

  Accepted date: 2024-10-10

  Online published: 2024-12-20

Supported by

This work was supported by the National Natural Science Foundation of China (62104063, 61974040), and the China Postdoctoral Science Foundation (2021M701055, 2022T150188). Key Scientific and Technological Project of Henan Provinces (232102221006).

Fold

Abstract

Acetone detection is crucial for diagnosing diseases such as diabetes and lung cancer. Therefore, it is essential to design a room-temperature acetone gas sensor with fast response and recovery times, high sensitivity, high selectivity, and a low detection limit. However, current acetone gas sensors face challenges in achieving high-selectivity detection at room temperature. This study primarily utilizes self-assembled organic monolayer functionalized MIL-88B to prepare selectivity acetone sensors. The results show that the detection sensitivity of the improved sensor to acetone is significantly improved. Compared with the MIL-88B sensor (0.1 ppm), the response value of the MIL-88B@3-aminopropyltrimethoxysilane (APTMS) sensor is increased by about 61.9%. The response to 10 ppm acetone is 83, and the selectivity is greatly improved at room temperature. This can be attributed to the chemical interactions between acetone molecules and APTMS on the sensor surface, which improves the sensor's specific recognition ability for acetone. Additionally, the sensor exhibits better stability and shorter response and recovery times. Consequently, the APTMS functionalization of MIL-88B presents an effective method for preparing room-temperature acetone sensors, combining high sensitivity and selectivity, and offering potential for non-invasive disease diagnosis.

Key words： MIL-88B; APTMS; Selectivity; Acetone sensor; Room temperature

Cite this article

Yuqing Du , Ning Lian , Wei Liu , Zhiheng Zhang , Jiahang Huo , Xin Chen , Junmeng Guo , Peng Cui , Lei Wei , Zuliang Du , Gang Cheng . Self-assembled organic monolayer functionalized MIL-88B for selective acetone detection at room temperature[J]. Moore and More, 2025 , 1(2) : 134 -146 . DOI: 10.1007/s44275-024-00014-z

References

[1] Amiri V, Roshan H, Mirzaei A, Neri G, Ayesh AI (2020) Nanostructured metal oxide-based acetone gas sensors: a review. Sensors 20:3096. https://doi.org/10.3390/s20113096
[2] Chen C-C, Huang Y-H, Fang J-Y (2022) Hydrophobic deep eutectic solvents as green absorbents for hydrophilic VOC elimination. J Hazard Mater 424:127366. https://doi.org/10.1016/j.jhazmat.2021.127366
[3] Mirzaei A, Leonardi SG, Neri G (2016) Detection of hazardous volatile organic compounds (VOCs) by metal oxide nanostructures-based gas sensors: a review. Ceram Int 42:15119-15141. https://doi.org/10.1016/j.ceramint.2016.06.145
[4] Ruzsányi V, Péter Kalapos M (2017) Breath acetone as a potential marker in clinical practice. J Breath Res 11:024002. https://doi.org/10.1088/1752-7163/aa66d3
[5] Ma R-J, Li G-D, Zou X, Gao R, Chen H, Zhao X (2018) Bimetallic Pt-Au nanocatalysts decorated In2O3 nests composed of ultrathin nanosheets for type 1 diabetes diagnosis. Sens Actuators, B 270:247-255. https://doi.org/10.1016/j.snb.2018.05.028
[6] Rabih AAS, Dennis JO, Ahmed AY, Khir MHM, Ahmed MGA, Idris A et al (2018) MEMS-based acetone vapor sensor for non-invasive screening of diabetes. IEEE Sens J 18:9486-9500. https://doi.org/10.1109/JSEN.2018.2870942
[7] Li Y, Zhang M, Zhang H (2020) Acetone sensors for non-invasive diagnosis of diabetes based on metal-oxide-semiconductor materials. Chin Phys B 29:090702. https://doi.org/10.1088/1674-1056/aba60b
[8] Haick H, Tang N (2021) Artificial intelligence in medical sensors for clinical decisions. ACS Nano 15:3557-3567. https://doi.org/10.1021/acsnano.1c00085
[9] Zhang Y, Liu S, Zhao Z-S, Wang Z, Zhang R, Liu L et al (2021) Recent progress in lanthanide metal-organic frameworks and their derivatives in catalytic applications. Inorg Chem Front 8:590-619. https://doi.org/10.1039/D0QI01191F
[10] Li Y-S, Bux H, Feldhoff A, Li G-L, Yang W-S, Caro J (2010) Controllable synthesis of metal-organic frameworks: from MOF nanorods to oriented MOF membranes. Adv Mater 22:3322-3326. https://doi.org/10.1002/adma.201000857
[11] Masoomi MY, Morsali A, Dhakshinamoorthy A, Garcia H (2019) Mixed-metal MOFs: unique opportunities in metal-organic framework (MOF) functionality and design. Angew Chem Int Ed 58:15188-15205. https://doi.org/10.1002/anie.201902229
[12] Bechelany M, Drobek M, Vallicari C, Abou Chaaya A, Julbe A, Miele P (2015) Highly crystalline MOF-based materials grown on electrospun nanofibers. Nanoscale 7:5794-5802. https://doi.org/10.1039/C4NR06640E
[13] Doonan CJ, Sumby CJ (2017) Metal-organic framework catalysis. CrystEngComm 19:4044-4048. https://doi.org/10.1039/C7CE90106B
[14] Shahiryar M, Kousar S, Mudassir MA, Irfan M, Shah SAA (2024) Recent approaches in tandem reactions catalyzed by MOF and MOF-based catalysts. J Organomet Chem 1005:122971. https://doi.org/10.1016/j.jorganchem.2023.122971
[15] Dolgopolova EA, Rice AM, Martin CR, Shustova NB (2018) Photochemistry and photophysics of MOFs: steps towards MOF-based sensing enhancements. Chem Soc Rev 47:4710-4728. https://doi.org/10.1039/C7CS00861A
[16] Fakhraei Ghazvini M, Vahedi M, Najafi Nobar S, Sabouri F (2021) Investigation of the MOF adsorbents and the gas adsorptive separation mechanisms. J Environ Chem Eng 9:104790. https://doi.org/10.1016/j.jece.2020.104790
[17] Xu W, Wang L-H, Chen Y, Liu Y (2022) Flexible carbon membrane supercapacitor based on γ-cyclodextrin-MOF. Mater Today Chem 24:100896. https://doi.org/10.1016/j.mtchem.2022.100896
[18] Hong DH, Shim HS, Ha J, Moon HR (2021) MOF-on-MOF architectures: applications in separation, catalysis, and sensing. Bull Korean Chem Soc 42:956-969. https://doi.org/10.1002/bkcs.12335
[19] Leelasree T, Selamneni V, Akshaya T, Sahatiya P, Aggarwal H (2020) MOF based flexible, low-cost chemiresistive device as a respiration sensor for sleep apnea diagnosis. J Mater Chem B 8:10182-10189. https://doi.org/10.1039/D0TB01748E
[20] Bi X, Liu X, Luo L, Liu S, He Y, Zhang L et al (2024) Isolation of sensing units and adsorption groups based on MOF-on-MOF hierarchical structure for both highly sensitive detection and removal of Hg2+. Inorg Chem 63:2224-2233. https://doi.org/10.1021/acs.inorgchem.3c04177
[21] Zhu W, Xiang G, Shang J, Guo J, Motevalli B, Durfee P et al (2018) Versatile surface functionalization of metal-organic frameworks through direct metal coordination with a phenolic lipid enables diverse applications. Adv Funct Mater 28:1705274. https://doi.org/10.1002/adfm.201705274
[22] Pei X, Liu J, Song W, Xu D, Wang Z, Xie Y (2023) CO2-switchable hierarchically porous zirconium-based MOF-stabilized pickering emulsions for recyclable efficient interfacial catalysis. Mater 16:1675. https://doi.org/10.3390/ma16041675
[23] Guo G, Min J, Xu Y, Zhou Y, Xu G (2024) Gas sensing properties of Pd-decorated GeSe monolayer toward formaldehyde and benzene molecules: a first-principles study. Langmuir 40:997-1006. https://doi.org/10.1021/acs.langmuir.3c03221
[24] Rostami S, Nakhaei Pour A, Salimi A, Abolghasempour A (2018) Hydrogen adsorption in metal-organic frameworks (MOFs): effects of adsorbent architecture. Int J Hydrogen Energy 43:7072-7080. https://doi.org/10.1016/j.ijhydene.2018.02.160
[25] Shimada T, Yasui T, Yokoyama A, Goda T, Hara M, Yanagida T et al (2018) Biomolecular recognition on nanowire surfaces modified by the self-assembled monolayer. Lab Chip 18:3225-3229. https://doi.org/10.1039/C8LC00438B
[26] Guo Y, Lu H, Jian X (2024) SiO2-modified APTMS nanocoatings encapsulating FeNi: amplifying microwave absorption and corrosion resistance. Appl Surf Sci 652:159286. https://doi.org/10.1016/j.apsusc.2023.159286
[27] Wong AKY, Krull UJ (2005) Surface characterization of 3-glycidoxypropyltrimethoxysilane films on silicon-based substrates. Anal Bioanal Chem 383:187-200. https://doi.org/10.1007/s00216-005-3414-y
[28] Yang L, Zhao T, Boldog I, Janiak C, Yang X-Y, Li Q et al (2019) Benzoic acid as a selector-modulator in the synthesis of MIL-88B(Cr) and nano-MIL-101(Cr). Dalton Trans 48:989-996. https://doi.org/10.1039/C8DT04186E
[29] Hu C, Yoshida M, Huang P-H, Tsunekawa S, Hou L-B, Chen C-H et al (2021) MIL-88B(Fe)-coated photocatalytic membrane reactor with highly stable flux and phenol removal efficiency. Chem Eng J 418:129469. https://doi.org/10.1016/j.cej.2021.129469
[30] Teng P, Liu Y, Sun Z, Meng H, Han Y, Zhang X (2023) Co-adsorption and fenton-like oxidation in the efficient removal of methylene blue by MIL-88B@UiO-66 nanoflowers. Dalton Trans 52:10472-10480. https://doi.org/10.1039/D3DT01413D
[31] Tran TV, Nguyen VH, Nong LX, Nguyen H-TT, Nguyen DTC, Nguyen TT et al (2020) Hexagonal Fe-based MIL-88B nanocrystals with NH2 functional groups accelerating oxytetracycline capture via hydrogen bonding. Surf Interfaces 20:100605. https://doi.org/10.1016/j.surfin.2020.100605
[32] Wang C-Z, Chen J, Li Q-H, Wang G-E, Ye X-L, Lv J et al (2023) Pore size modulation in flexible metal-organic framework enabling high performance gas sensing. Angew Chem Int Ed 62:e202302996. https://doi.org/10.1002/anie.202302996
[33] Siraj S, Bansal G, Hasita B, Srungaram S, Sukas KS, et al (2024) MXene/MoS2 piezotronic acetone gas sensor for management of diabetes. ACS Appl Nano Mater 7:11350-11361. https://doi.org/10.1021/acsanm.4c00834
[34] Pi M, Zheng L, Luo H, Duan S, Li C, Yang J et al (2021) Improved acetone gas sensing performance based on optimization of a transition metal doped WO3 system at room temperature. J Phys D: Appl Phys 54:155107. https://doi.org/10.1088/1361-6463/abd8f0
[35] Thuy Nguyen LH, Navale ST, Yang DH, Nguyen HTT, Phan TB, Kim J-Y et al (2023) Fe-based metal-organic framework as a chemiresistive sensor for low-temperature monitoring of acetone gas. Sens Actuators, B 388:133799. https://doi.org/10.1016/j.snb.2023.133799
[36] Nemufulwi MI, Swart HC, Shingange K, Mhlongo GH (2023) ZnO/ZnFe2O4 heterostructure for conductometric acetone gas sensors. Sens Actuators, B 377:133027. https://doi.org/10.1016/j.snb.2022.133027
[37] Zhang S, Yang M, Liang K, Turak A, Zhang B, Meng D et al (2019) An acetone gas sensor based on nanosized Pt-loaded Fe2O3 nanocubes. Sens Actuators, B 290:59-67. https://doi.org/10.1016/j.snb.2019.03.082
[38] Sen S, Maity S, Kundu S (2022) Fabrication of Fe doped reduced graphene oxide (rGO) decorated WO3 based low temperature ppm level acetone sensor: unveiling sensing mechanism by impedance spectroscopy. Sens Actuators, B 361:131706. https://doi.org/10.1016/j.snb.2022.131706
[39] Cao Y, Zhou C, Qin H, Hu J (2020) High-performance acetone gas sensor based on ferrite-DyFeO3. J Mater Sci 55:16300-16310. https://doi.org/10.1007/s10853-020-05194-1
[40] Qin W, Zhang R, Yuan Z, Xing C, Meng F (2022) Preparation of p-LaFeO /n-Fe O heterojunction composites by one-step hydrothermal method and gas sensing properties for acetone. IEEE Trans Instrum Meas 71:1-9. https://doi.org/10.1109/TIM.2022.3169570
[41] Singh M, Kaur N, Drera G, Casotto A, Sangaletti L, Comini E (2020) SAM functionalized ZnO nanowires for selective acetone detection: optimized surface specific interaction using APTMS and GLYMO monolayers. Adv Funct Mater 30:2003217. https://doi.org/10.1002/adfm.202003217
[42] Xu S, Wang M, Chen C-P, Feng S (2023) Sea urchin-like SnO2/α-Fe2O3 heterostructural microspheres for enhanced acetone gas sensing: materials preparation, performance evaluation, and mechanism investigation. Sens Actuators, B 379:133288. https://doi.org/10.1016/j.snb.2023.133288
[43] Chen Z, Liu W, Si X, Guo J, Huo J, Zhang Z et al (2023) In situ assembly of one-dimensional Pt@ZnO nanofibers driven by a ZIF-8 framework for achieving a high-performance acetone sensor. Nanoscale 15:17206-17215. https://doi.org/10.1039/D3NR04040B
[44] Zhao Z, Lv Z, Chen Z, Zhou B, Shao Z (2024) α-Fe2O3/TiO2/Ti3C2Tx nanocomposites for enhanced acetone gas sensors. Sensors 24:2604. https://doi.org/10.3390/s24082604
[45] Jung G, Jeong Y, Hong Y, Wu M, Hong S, Shin W et al (2020) SO2 gas sensing characteristics of FET- and resistor-type gas sensors having WO3 as sensing material. Solid-State Electron 165:107747. https://doi.org/10.1016/j.sse.2019.107747
[46] Tan X, Chen X, Guo J, Wang L, Dong Z, Li X et al (2024) High performance and highly selective sensing of triethylamine sensors based on Cu-doped MoO3 nanobelts. J Alloys Compd 976:173152. https://doi.org/10.1016/j.jallcom.2023.173152
[47] Li C, Choi PG, Kim K, Masuda Y (2022) High performance acetone gas sensor based on ultrathin porous NiO nanosheet. Sens Actuators, B 367:132143. https://doi.org/10.1016/j.snb.2022.132143
[48] Mazzei P, Fusco L, Piccolo A (2014) Acetone-induced polymerisation of 3-aminopropyltrimethoxysilane (APTMS) as revealed by NMR spectroscopy. Magn Reson Chem 52:383-388. https://doi.org/10.1002/mrc.4076
[49] Yang C, Li Q, Tang L, Xin K, Bai A, Yu Y (2015) Synthesis, photocatalytic activity, and photogenerated hydroxyl radicals of monodisperse colloidal ZnO nanospheres. Appl Surf Sci 357:1928-1938. https://doi.org/10.1016/j.apsusc.2015.09.140
[50] Xu B, Yang H, Cai Y, Yang H, Li C (2016) Preparation and photocatalytic property of spindle-like MIL-88B(Fe) nanoparticles. Inorg Chem Commun 67:29-31. https://doi.org/10.1016/j.inoche.2016.03.003
[51] Zorainy MY, Kaliaguine S, Gobara M, Elbasuney S, Boffito DC (2022) Microwave-assisted synthesis of the flexible iron-based MIL-88B metal-organic framework for advanced energetic systems. J Inorg Organomet Polym Mater 32:2538-2556. https://doi.org/10.1007/s10904-022-02353-6
[52] Liu W, Si X, Chen Z, Xu L, Guo J, Wei L et al (2022) Fabrication of a humidity-resistant formaldehyde gas sensor through layering a molecular sieve on 3D ordered macroporous SnO2 decorated with Au nanoparticles. J Alloys Compd 919:165788. https://doi.org/10.1016/j.jallcom.2022.165788
Options
Outlines

/

〈 〉

Copyright © Moore and More, All Rights Reserved.